Head to San Francisco, where they bike year round! (Amsterdammers and Copenhageners also bike year round, partly because they continue to have safe places to bicycle whereas Chicagoans deal with snowed-in bike lanes.)
UPDATED: How BART (Bay Area Rapid Transit, San Francisco region) treats bikes on board. Simple signage and a bike graphic tell all passengers where bikes belong. Photo by Jim Dyer. Morephotos.
Look at the photo below and take in all the details about the bicycle’s position and orientation in relation to the vestibule, modesty panel, doors, seating, and aisle. Accommodating bicycles on many of the Chicago Transit Authority’s ‘L’ cars can be a hassle, not only for the bicycle-toting customer, but for the other passengers as well.
This photo shows what I see as the only appropriate location for a bicycle on the Red Line’s 2600-series car.
The passengers may be hit by wheels or handlebars, or have their personal space intruded upon or reduced.
The bicycle owner has the responsibility to ensure they don’t hit or disturb other passengers – to be successful with this on every trip is nearly impossible. Additionally, according to the platform position, the owner will have to move their bicycle to the other side of vestibule to allow access to the doors and aisle. Sometimes other passengers are already standing there, not paying attention, and it can be almost embarrassing to ask them to excuse you and your bicycle.
The 2600-series car in which I rode and took these photographs was built in the 1980s. I think it’s safe to say that the designers and engineers at CTA and Budd Manufacturing didn’t consider the spatial needs of bicycles in the plans. And retrofitting train cars is expensive. Bicycle riders in Chicago “get by” with the current rolling stock. (The train cars with the butterfly doors cannot accommodate wheelchairs or bicycles – there are 2 of these cars on many Blue Line runs.)
But there’s an opportunity to change things because the CTA will be asking Bombardier Transportation for some refinements on the 5000-series cars that the transit agency has been testing on all lines. Now’s our chance to request changes!
If you don’t know of the differences beforehand, you can’t recognize that this is a brand new car with a slightly different exterior design. The interior, however, differs wildly.
The most striking distance is the longitudinal or aisle-facing seats.
The new train car now provides two spaces for passengers in wheelchairs (look in the middle for the wide seat backs facing you). The seats flip up and there’s a seatbelt to hold the wheelchair in place. Photo by Kevin Zolkiewicz.
Based on the design we’ve all seen, I suggest the CTA and Bombardier make the following changes to better hold bicycles on board:
With signage and markings (on the interior walls and floor), indicate that the space for wheelchairs is a shared space and that passengers with bicycles may also use it. The signage would mention that customers with disabilities always have priority as well as mention the times bicycles are allowed on-board. This change would send a stronger message to all other passengers that bicycle owners also have a priority to use this space and they may be asked to move so a bicycle can fit here.
In an educational and marketing campaign, teach customers about bike-on-board rules, where to place bicycles on the ‘L’, and where and when customers can expect passengers with bicycles.
On or near the train door exterior, use markings to indicate where passengers with bicycles should board. The current system has a sign on one entrance saying, “Limit 2 bicycles this car” (see photo below). The other entrance has no sign. The confusion lies here: Should two bicycles occupy the same space, at one end of the car and only enter through the door with the sign? Or should two bicycles occupy opposite ends of the car and enter through either door? If the former is preferred, the second door could have a sign that says one should enter with their bicycle through the other door.
Install a method or mechanism that can hold a bicycle still. This could be with a hook, a seatbelt, or a “groove” in the floor. In Minneapolis, passengers with bicycles can hang them (see photo below).
Install a light at each door in the car that would pulse to indicate which doors will open at the next platform (left or right). This can help passengers with bicycles know where other customers will be alighting and boarding.
Imagine every suburb around Chicagoland connected to a handful of others by a “bike road.” In the Netherlands, it’s a strip of pavement about 1.5 American-car lanes wide but the bicyclist always has priority and any drivers must drive at the speed of the bicyclist. For cars, the road serves mostly rural towns, but for bicycling, it serves as part of a cross-country and intercity bikeway. On some parts of your trip to another town you might ride on bike roads, and others on bike-only paths.
This bike road helps connect Houten and Utrecht. I’m traveling north alongside a Nederlandse Spoorwegen Sprinter train. See more photos from my day trip to Utrecht and Houten.
The Cal-Sag Trail is a typical multi-use path in the works and will do something similar, connecting south suburban Cook County communities (like Calumet Park, Blue Island, and Alsip) along the Calumet River and the Calumet-Sag Channel. It will be car-free. While multi-use paths in Illinois are often used for recreational or touring use (many don’t lead to destinations, or are out of the way for convenient routes), the Cal-Sag Trail will be useful for social, shopping, and school trips as well as fitness. Additionally, it will connect to at least three existing trails.
When any path or road opens it needs sufficient wayfinding. The “United States Numbered Bicycle Routes” system began in 1982 to do for bicycling what numbered highways did for driving: make it easy to create and follow a route. Planning for the system was revitalized in 2010.
Several European countries (including Netherlands and Germany) have had such a system for years but instead of numbering routes, they number junctions. Starting at any origin shown on the junction map, find the junctions that connect the route segments to your destination and remember their numbers. Then watch for signs that point you in the direction of the next number. You only need to remember 2-3 numbered junctions at a time because there will eventually be a new map to remind you which junction is next. See photo and route example below.
This junction is number 34. To go to Houten from here, follow the directional signs, first to 33, then to 36, then to 01. The “bike road” photo above was taken near junction 36.
Welcome to the grand entrance of the Illinois Prairie Path to Elmhurst, Glen Ellyn, Wheaton, Aurora, and Batavia! Google Street View image
Another Chicago trail example
There’s a great example near Chicago of a trail that’s “80% there.” The Illinois Prairie Pathbegins in Maywood, Illinois, a couple miles from the western edge of Chicago, and a mile from the Forest Park Blue Line terminal. Getting there from Chicago is a problem: it’s not connected to anything but 4-lane, fast-moving 1st Avenue. And bicycling to Maywood from anywhere in Chicago there is a lack of safe routes, regarding infrastructure and personal safety (a lot of Chicagoans would consider the center west side quite dangerous). I grew up the far western suburb of Batavia and have occasionally ridden the trail, but only once did I ride it while living in Chicago.
I wanted to visit Fry’s Electronics in Downers Grove, just 4 miles from the trail. It took me over an hour to get to the entrance and then I missed the sign (or wasn’t there one?) for Finley Road and went too far. It was getting dark, so I decided to call the trip a small loss and boarded a Metra train at Glen Ellyn for downtown.
Italian trains and stations look modern and decrepit simultaneously. One of a thousand observations on my trip to Europe in December and January.
MODERN: Roma Termini (main station) has at least 50 automatic ticket vending machines that accept credit and debit cards and display text in multiple languages.
MODERN: But then Italy has something the United States will not have for several more years (go Florida!): a high-speed train. This one travels up to 300 KM/H (186 M/H). I caught my train going 247 KM/H from Roma to Milano.
In Chicago, I think there’s more of a balance to the train state of affairs: not so modern, but not so decrepit either. New stations opened on the Brown Line but without the fancy glass ceilings from the early renderings (had to cut costs). Train cars are 40 years old (new ones in testing). Subway stations have dismal lighting (coupled with the dirty windows it’s hard to tell the difference between the platform and the tunnel areas). Metra just started accepting credit cards at the downtown stations in 2010.
There are six candidates who want to be Chicago’s next mayor. What are their views on transportation?
EI = Environmental Illinois, a statewide environmental advocacy organization. Note that ALL candidates answered YES to all of EI’s questions asking about if they support certain green and sustainable transportation initiatives. I provide links to the answers of the candidates who had additional comments (Del Valle, Emanuel, Walls).
Candidate
View
Plan
Carol Mosely Braun
Wants to double transit ridership and bicycling usage. Link.
No plan at this time
Gery Chico
Supports diverse, sustainable, and active transportation, including transit.
No plan at this time.
Miguel Del Valle
Supports diverse, sustainable, and active transportation, including transit. Complete streets.
Supports diverse, sustainable, and active transportation (think walking and biking), including transit, freight, and high-speed rail. Complete streets.
I should note that contrary to the belief of many Chicagoans (and perpetuated by the implications of at least one candidate), the Chicago Transit Authority is a quasi-governmental agency (or “municipal corporation”) created by the Illinois state legislature. A detailed description from Chicago-L.org:
The governing body of the CTA is the Chicago Transit Board consisting of seven members, of which four are appointed by the mayor of Chicago and three by the governor of Illinois. Each’s appointment must be approved by the other. Each board member serves a seven year term, staggered to minimize abrupt changes in policy. The board chooses a General Manager (changed to “Executive Director” in 1976 and now called “President” since March 1992) to oversee day-to-day operations. The first board took their oath of office September 1, 1945, with the first Executive Director, Walter J. McCarter, taking office in 1947.
The board, at least since Frank Kreusi, has always hired the president that Mayor Richard M. Daley chose, although it is not the mayor’s responsibility.