Category: Cities

Bikes and streetcar tracks

June 2, 2010 / / 25 Comments

UPDATE 12-11-10: Someone recently searched for rubber in tracks and I wanted to provide some additional resources on the topic of protecting people who ride bikes from the dangers of open streetcar tracks. It is possible, in some situations, to fill the track flangeway (where the wheel goes) with rubber that the train depresses as it rolls over but people riding bikes ride over a level surface. Resource one input from people around the world, and two, a column in The Oregonian newspaper of Portland.

UPDATE 12-14-10: BikePortland has a story about an activism and advocacy group (AROW) that will demand better accommodations for bicycling around new streetcar tracks in Portland, Oregon.

UPDATE 08-13-13: Zurich, Switzerland, will be testing a flangeway filler on their tram tracks. I believe this will be the first transit system to test the rubber fill. 

Bicycle riders in Seattle are suing the City of Seattle for not providing enough warnings about streetcar tracks in the South Lake Union neighborhood. They allege the City installed warning signs only after several bike-track crashes.

Photo: A sign on Stewart Street in Seattle, Washington, advises bicycle riders to use EXTREME CAUTION when crossing the streetcar tracks. These signs are coming under question in a lawsuit this week.

Mixing bicycles and transit is one of the most sensible matches of transportation modes. The Federal Transit Administration has been promoting a positive union since at least 1999 (see the booklet they produced). The publication includes case studies and good examples of integration, including a story about how King County Metro (the primary bus operator in Seattle) installed bike racks on its buses in 1993, following the footsteps of Phoenix.

Photo: A resident rides their bike on the street while a Portland Streetcar rolls by.

So how is it now, 17 years later, we’re still deliberating how streetcars, light rails, and bicycles can safely share the road? Why this is a problem:

  • People are getting hurt. Concerns about personal safety demotivate people to ride their bikes.
  • The Federal government is funding many new streetcar projects across the country, including in Tucson, Arizona, two hours south of Phoenix, which has its own light rail system.
  • Bicycle riders have been navigating tram and streetcar tracks in Europe for 100 years. What knowledge can European riders and planners share with us?

Photo: A rubber-filled flangeway in the gap between rail and deck on the Cherry Avenue Bridge in Chicago, Illinois. This bridge serves a 1-car train a few times a week.

Could a rubber-filled flangeway be used on a medium-frequency streetcar line?

Keep Portland weird!

May 29, 2010 / / 0 Comments

Co-opting Austin’s marketing strategy, Portland also wants you to keep it weird (read the history of this slogan). If you haven’t yet, please peruse my 54 (so far!) photos I’ve uploaded from my trip to Portland, Oregon, in April this year.

A wall in Chinatown (yeah, Portland has a Chinatown) invites citizens and visitors alike.

Bicycling in Portland is so prevalent, you’ll see entire families on the streets riding their bikes to the park, to school, or shopping.

Check out Portland’s unique transportation facilities and improvements in my photoset, “Transportation in Portland.”

I’ve graduated

May 28, 2010 / / 0 Comments

Say hello to Chicago’s newest planner. ME!

Instead of walking at my school’s graduation ceremony on May 7, 2010, I was busy at work making sure bike parking in Chicago is equitably distributed, visiting the Pacific Northwest, and generally having fun.

Me having fun riding a Volae recumbent bicycle at the Rapid Transit Cycleshop grand opening in University Village at UIC’s South Campus.

Did I say something about bike parking equity? Oh, yeah, I’ve only blogged about it here a couple of times before and it comprised my entire master’s project (which thankfully was approved and deemed “satisfactory” by my wonderful adviser, Vonu). You can read the entire project on my website. I wrote my project in a wiki called DokuWiki – it’s a text-based, lightweight application that encourages writing and doesn’t stand in the way of a creative masterpiece (like Microsoft Word does).

It’s a huge project (there are over 35 webpages that come out to 139 printed pages). I realize that most people won’t read it, but in the course of preparing for a short presentation I recently gave to some staff members at Active Transportation Alliance, I created a short summary to aid me.

Read my project, Bike Parking Equity, or the summary.

A photo of my cheaply printed project. I printed to PDF each and every webpage in the project and then combined them all, using the Mac’s built-in functionality and Preview application.

Bridges of Portland

May 26, 2010 / / 0 Comments

Like Chicago, Portland has many moveable bridges that connect major parts of the city. In Chicago, you have to cross the Chicago River from the west or north to get into the central business district (or loop). For Portland, you’ve got to cross the Willamette River from the humongous east side to the west side and central business district.

But that’s where the similarities stop. While Chicago has twenty bikeable bridges* from Lake Shore Drive on the east to Roosevelt Road on the south, they are each 200-500 feet long and bicyclists ride amongst normal traffic (except for northbound Lake Shore Drive). To ride on the bridges in Portland, bicyclists ride on bike-specific facilities across five bridges, all over 1,000 feet long.

There is only one lane for people riding bikes.

From north to south:

  • Broadway – Sidewalk with one-way bike traffic and two-way pedestrian traffic in each direction.
  • Steel Bridge – Narrow sidewalk on the lower level with tw0-way bike and pedestrian traffic.
  • Burnside – Bike lane, one in each direction.
  • Morrison – 15-foot wide path for bicyclists and pedestrians, in both directions. The City of Portland has construction details on this new path.
  • Hawthorne – Sidewalk with one-way bike traffic and two-way pedestrian traffic in each direction.

It’s great that people riding bikes are accommodated but all of these bridges are excellent examples of “afterthought planning.” There are tens of thousands of people riding bikes across the bridges each day in very close quarters (see this video I made of people riding and walking on the Hawthorne Bridge). Expensive changes are being made now (or have recently been constructed) to accommodate the high volumes of bikes on the bridges.

Complete streets policies are being adopted across the country that attempt to address our past experience with transportation infrastructure construction: bikes will be accommodate throughout all aspects of planning, design, and construction to ensure people riding across these bridges on bikes don’t have to tread carefully between joggers and high curb next to automobiles and buses traveling at 30 MPH.

The Burnside bridge has a typical bike lane.

The Columbia River Crossing (a highway bridge replacement project between Portland, Oregon, and Vancouver, Washington) will be a failure for residents from the day it opens if it does not include facilities that allow for comfortable and convenient biking.

I didn’t appreciate the riding environment on any of the bridges** except for the Burnside bridge. This one seems most like the twenty Chicago bridges I have the choice of riding on each day on my commute to work – they look and act like typical streets. While bike-specific facilities like those on the five Portland bridges are not necessary, taking care to make cycling across bridges convenient and comfortable is a priority.

There’s only one path on the Steel Bridge and its on the lower level. You should probably only use this bridge recreationally because it doesn’t connect well into the street grid at either end.

*Only two of these twenty bridges have bike-specific facilities. Wells has a bike lane and a treatment to make cycling safer on the open-grate metal bridge. The Lakefront Trail traverses the Lake Shore Drive bridge.

*I did not ride on the Morrison bridge during my trip in April 2010.

A diversity of transportation

May 12, 2010 / / 0 Comments

Portland is a great city to visit to see a large variety of small-scale transportation, including facilities and accommodations for non-motorized and human-powered transportation, or out of the ordinary modes like an aerial tramway (also called a cable car). The photos are from my trip to the Pacific Northwest in April 2010.

You pay to go up. It’s free to come down.

Portland also has traditional transportation modes like streetcars and light rail.

What to see and ride in Portland (I rode or saw each of these):

  • TriMet MAX (Metropolitan Area Express)
  • Portland Streetcar
  • Portland Aerial Tram
  • Bikeways, including bike lanes, marked shared lanes, bike boulevards (now called neighborhood greenways), and cycletracks
  • Bike parking
  • Lift and moveable bridges – the Steel Bridge carries light rail, railroad, automobiles, pedestrians, and bicyclists; the Hawthorne is the most popular bridge for bicyclists. I made sure to cross over the Broadway, Hawthorne, Steel, and Burnside bridges. I missed crossing on the Morrison bridge. I guess I will have to take another trip!
  • Bus – This is standard fare, nothing unique about it in Portland compared to other cities.

Bicycles make up 21% of all traffic on the Hawthorne Bridge. See the rest of my “Transportation in Portland” photos.