Category: Bicycling

Divvy overtime fees and most frequent trip distances

Two people check out a Divvy bike in front of 3565 N Pine Grove Avenue, home to residents who sued the Chicago Department of Transportation and Alderman James Cappleman to have its installation prevented. That failed. Photo by John Greenfield. 

Kaitlyn Jakola interviewed me last week for the Chicago Magazine blog, The 312, about how newcomers should deal with Divvy bike sharing. I think I gave some good answers. Stick to the bike lanes by using an app (although that’s hard because so many of them don’t link up) and think about the rules you would follow if you were driving a car (which assumes you know how to do that). Two of the commenters called this a scam. The first stopped there but the second commenter showed some understanding of transportation and economics so I thought that I could reply and it would be taken seriously. They said:

It seems to me like the system is designed to create extra or ‘overage’ fees. Having to stop every 30 minutes and ‘redock’ your bike is prelude to a ripoff. By the time you get comfortable riding and determine where you’re going to go, it’s time to ‘redock’ then…

It doesn’t seem like the commenter knows how bike sharing works: think of a taxi that you drive yourself. The bike taxis are available at predetermined stands around the city. It’s there when you need it and you don’t need to own the vehicle.

Regarding overtime fees… The average trip taken on Divvy bikes is only 18 minutes long, which the Chicago Tribune – part of the same parent company as Chicago Magazine – reported on. That coincides with the average trip distances Americans and Cook County residents take. The Southern California Association of Governments, the federally-designated Metropolitan Planning Organization for the nation’s largest regional planning area, found that 80% of trips residents in that region were less than 2 miles long (.pdf). This matches what the Chicago Metropolitan Agency for Planning, the local MPO, found for Cook County that the average trip distance was 3.0 miles and the median trip distance was 2.3 miles (.pdf). Both studies’ figures aggregate trip mode, so this includes all trips people make by bus, personal automobile, walking, or bicycling. All of the distances are bikeable in 18 minutes.

Creating a bike map for Richmond, Indiana

A cycle map of Richmond, Indiana, before I added the city’s signed routes as a “relation”.

I visited Richmond, Indiana, in early August with my friend who grew up there. There isn’t much to do there, but there are a lot of neat places to bike to. Richmond had more features mapped than I expected, but I was happy to contribute via Pushpin and JOSM. With Pushpin OSM, an app for iOS, I added a couple of venues I visited, including Firehouse BBQ & Blues.

With JOSM, though, I wanted to add the city’s bike routes so they would appear in OpenCycleMap and could then be immediately embedded as a (somewhat) interactive map on the Bike Richmond website. I asked a city planner for a bike map and he gave me a GIS printout that showed the “recommended routes” (which are unsigned) and then he drew on the signed route that augment the recommended routes. The signed route essentially creates a loop.

I tagged all of the recommended routes as “bicycle=designated”. After the tiles in OpenCycleMap updated to include my work in Richmond I realized that OCM doesn’t symbolize “bicycle=designated” unless they’re in a relation. I created a relation, calling it the “City of Richmond Signed Bike Route“.

The new cycle map of Richmond, Indiana. 

This was cross-posted to my OpenStreetMap diary. My next project for OSM in Richmond is to map all the murals with the tag “tourism=artwork”. The mural below was designed by my friend, Ryan Lakes. There are murals painted on the sides of many buildings. One motif is to paint realistically, so it appears that the building really has the Wright brothers bicycle shop.

Mural in two-point perspective. 

A painted fire on the side of Firehouse BBQ & Blues. 

NIMBYs can’t have it all: Student instructor at West Town Bikes supports wheel-friendly park

Lebster, far left, three students at West Town Bikes, and executive director Alex Wilson, head to Open Streets on State Street. 

Update August 27:  Lebster was interviewed by RedEye reporter Leonor Vivanco today.

Lebster Pabon, an instructor at West Town Bikes in Humboldt Park (it used to be in West Town!), attended an important Chicago Park District board meeting yesterday and brought one of his high school students and that student’s mother. They spoke up to support what would be the city’s first wheel-friendly park, where people can skate, bike, and… which would be new to Chicago… use wheelchairs in the park. Neighbors of the Bloomingdale Trail were in attendance to oppose the park.

Lebster called me to say that another attendee spoke up to say he would like to bring his grandchildren to such a park, and that a board member added he has to take his kids out of Chicago to use bikes in a park like this. Lebster mentioned that since it’s at the end of the Bloomingdale Trail it would be very accessible: ride up Rockwell from West Town Bikes, a low-traffic “side street”, hop on the Bloomingdale Trail, and ride 10 minutes over to Walsh Park. When asked if the park would attract people from other suburbs, Lebster said it would attract people from around the country because it could host events.

Finally, a Chicago Park District board member asked if bikers and skaters coexist. Lebster told me he said, “Yes, the culture is very disciplined in skate parks”. I’ve witnessed it myself and I didn’t expect it, imagining that teenagers are unruly. Rules aren’t needed, though, as each person has learned to take a turn in the park and then respect the time and talent of the other skate park users.

This is a very special and unique moment for young Chicagoans who are active outside as this proposed park would be the first to accommodate bicycles and wheelchairs. The Chicago Park District’s first core value is “Children first”. The website says, “Our most important task is to bring children and families into our parks and give them great reasons to stay and play for a lifetime”. Lebster’s contributions to the meetings, and the conversations around the park, were integral to that value and the District’s mission.

About West Town Bikes

West Town Bikes and I have a good history. I came into contact with the organization in 2006, the year I moved to Chicago. I joined a scavenger hunt in October that ended at the shop. I met a lot of people there that have shaped my bicycle advocacy future, including Kevin Monahan, who put John Greenfield and I together after which we started Grid Chicago, Jim Freeman, Kevin Conway, Gin Kilgore, and countless other people. West Town Bikes is also the host and a sponsor of my annual Cargo Bike Roll Call events.

Pervasive Divvy station maps offer big opportunity to show people around Chicago, but need major changes

A man looks at one of the first five stations installed, at State and Randolph (but the board says State and Lake). 

Navigation maps on Divvy bike sharing stations will be placed at 400 locations around the city. A map this pervasive, to be read and interpreted by hundreds of thousands of locals and visitors to Chicago (including people who will never use Divvy), should have a design that communicates good routes to ride, and important places like train stations, nearby Divvy stations, points of interest, and where to find places to eat or be entertained.

The design of the maps on the station boards needs to be improved. The first issue I noticed in June is that streets and alleys are given equal significance in their symbology, possibly confusing people on which route to take. The map should strip alleys, offering room for more info on the map, like useful destinations. It may be easier for some to locate the Art Institute of Chicago as a labeled, light-gray block instead of trying to locate its address on the map (nigh impossible). When one locates the destination, one can more easily locate the nearest Divvy station.

The map at North/Clybourn’s station (actually on Dayton Street) covers a large portion of the map with the “you are here” label and lacks the connection between North Avenue and Goose Island. 

I’ve noticed that the “you are here” labels cover up train station markers/labels, and the loop elevated tracks are missing (a common reference point for Chicago). It takes a moment to realize that the white text is labeling the CTA stations and not the nearby Divvy stations. It’s unclear where “you are here” points to, until you realize that it’s at the center of the blue 5-minute walking circle. Dearborn Street is symbolized as a bike lane, but not labeled as a street. Clark Street and State Street are doubly wide, but the meaning of that is unknown. The legend is useful to distinguish bike lane types but is placed far from the map, at the bottom of the board.

Here are other areas where the boards and maps should be redesigned:

  1. The “service area” map has low utility in its current form as it’s not labeled with streets, points of interest, or a time or distance scale. It appears as a reduced-boundary blob of Chicago. It could be improved if it communicated “this is where you can go if you take Divvy” and label streets, train stations, and points of interest at the edge of the service area. 
  2. The 5-minute bike ride map is nearly identical to the 5-minute walk map, but smaller. The 5-minute walk map should be made larger and integrate the now-eliminated 5-minute bike ride map.
  3. Much of the text is unnecessarily large. The CTA station labels are so large in comparison to the streets that it’s not clear where on the block the stations are located. CTA stations are labeled but the train routes aren’t always shown (Loop stops are just gray); it’s not even clear that they’re CTA stops.
  4. The purpose of the blue circle isn’t labeled or clear: the larger map, titled “5 minute walk”, shows a large map but there’s a blue circle – is the blue circle or the square map the 5-minute edge? The connection between the title and the blue circle could be tightened by using the same color for the text and the circle or by wrapping the text around the circle path.
  5. The map, which is likely to serve as a neighborhood “get around” and discovery map for tourists, and even locals, lacks basic info: there are absolutely no destinations marked, no museums, parks, etc.
  6. The bike lane symbology doesn’t match the Chicago Bike Map, which uses blue, purple, orange, and red to denote different bike lane types, and hasn’t used green for at least seven years. The use of green makes them look like narrow parks.
  7. The map designers should consider placing the city’s cardinal grid numbering system to enable readers to find an address.
  8. North/Clybourn’s Divvy station map lacks a bikeable connection from North Avenue to Goose Island via the Cherry Avenue multi-modal bridge. The maps should be reviewed for street network accuracy by people who live and ride nearby.

Photo shows the original board and map at the Milwaukee/Wood/Wolcott station, which has since moved. The station on this map marked at Marshfield/North was moved to Wood/North this week. 

There are many opportunities for the map to change because they will have to be updated when stations are moved, for both the moved station and the handful of station boards that include the moved station. At least four boards needed to be updated when the station at Milwaukee/Wood/Wolcott moved from Milwaukee Avenue (next to Walgreens) to Wood Street (across from the Beachwood). The maps for Citibike in New York City don’t share these design flaws.

The Citibike station boards and maps were designed by Pentagram, a well-known design firm, with whom the city has a longstanding relationship, designing the new wayfinding signs for neighborhoods, the “LOOK” anti-dooring decal for taxi windows, and the bus station maps. One of the key differences between the Citibike and Divvy maps is the text label size, the symbol label size, and the presence of building outlines (that other huge group of things that defines a city, contrasting the roads-only view on the Divvy map).

A close-up view of a Citibike map. Photo by Oran Viriyincy. 

N.B. More trips are currently taken by tourists and people with 24-hour memberships than people with annual memberships. I question the bikeway symbology and suggest that the streets have three symbols: one representing a bike lane (of any kind), one representing sharrows (because they are legally different from bike lanes) and one representing a street with no marked bikeways. The current bikeway symbology may not be understandable by many visitors (or even understood by locals because of differing definitions) and show a jumble of green hues whose meanings are not clear or even useful. It’s not currently possible to take a route on a bicycle that uses only protected bike lanes, or uses protected bike lanes and buffered bike lanes, so the utility of this map as a route building tool is weak. One wastes their time looking at this map in the attempt to construct a route which uses the darkest green-hued streets.

I also recommend that the board and map designers give Divvy CycleFinder app messaging greater prominence. I believe that a majority of users will be searching app stores for appropriate apps. When you search for Divvy, you’ll find eight apps, including my own Chicago Bike Guide.

Updated 22:43 to clarify my critique and make more specific suggestions for changes. 

Dutch biking is better than all other kinds

Yonah Freemark, famous person behind The Transport Politic and now a semi-famous person at Metropolitan Planning Council (shut down the Illiana, Yonah!), needed a ride from the Damen Blue Line station for a special Vancetour of the Bloomingdale Trail. The Dutch way of biking is extremely social, both because of the way bicycles are built and the way the infrastructure is built. That style is rare in America, and even downright anti-social and hostile in many places. For starters, there’s not enough room to ride side-by-side (in Chicago it’s illegal outside of too-narrow bike lanes).

The WorkCycles Fr8, my main bicycle, is built like a tank. Some may call it the Mercedes G-Class SUV of bicycles. I called it a Cadillac to some guy outside City Hall – referring to how comfortably it rides – and he said “They suck, it’s a Mercedes.” (He was German and I don’t think either of us knew any Dutch car manufacturers.)

Thank you, Ryan Lakes, for the photos.