Page 36 of 172

Chicago has too many traffic signals

IMG_2496

People wait at a stop light on the first major ring road in the city center of Amsterdam. Photo: Northeastern University, Boston

I was flabbergasted to learn today that there are only 5,500 signalized intersections in all of the Netherlands. I was reading Mark’s blog “Bicycle Dutch” and he interviewed a city traffic signal engineer in Den Bosch, who described how different road users are prioritized at different times based on the complex programming. (Watch the video below.)

In Chicago there are more than 3,000 signalized intersections. And I believe this is way more than we need.

I understand more than the average person how traffic moves in each place and how it “works”. There is such a thing as too many traffic signals because at some point the signals (their proximity and their programming) start causing delays and conflicts.

Saying that traffic – of all kinds, bikes, trucks, buses, delivery vans, and personal vehicles – moves better in cities in the Netherlands than in Chicago is an understatement.

Aside from their impacts on traffic (which can be good in some situations, but aggravating existing problems in other places), signals are very expensive to purchase, install, and maintain.

In Chicago, an alderman (city councilor) can use part of their $1.3 million “menu” money annual allocation to purchase a traffic signal for $300,000. That’s money that won’t be used for transportation investments that reduce the number of severe traffic crashes as well as reduce congestion like bus lanes and protected bike lanes.

Let’s review

I compared their populations (about 17 million in the Netherlands and 2.7 million in Chicago) and saw that Chicago has a lot more traffic signals per person.

On Twitter, however, I was challenged to find the number of traffic signals per mile driven, not per capita.

So, I did, and I was surprised by the result.

This assumes I collected the right statistics, and converted the driving figures correctly.

The surprise: There are more passenger miles driven (known as VMT) in the Netherlands, per capita, than in Chicago. I actually can’t even get passenger miles driving in Chicago – I can only find “all miles” driven. And that includes trips on interstates that pass through Chicago but where the driver or passengers don’t stop in Chicago.

Here’s the analysis, though.

Driving

  • According to the OECD, there were 145,400 million kilometers driven on roads, for passenger transport, excluding bus coaches, in the Netherlands in 2013 (the latest year for which data was available in the Netherlands). That’s 145.4 billion kilometers. (Source, no permalink.)
  • According to the Illinois Department of Transportation, there were 11,150,109 thousand miles for all kinds of road transport, in Chicago in 2013. That’s 11.2 billion miles, which converts to 17.9 billion kilometers. (Source)

Population

  • In 2013, the Netherlands had 16,804,430 inhabitants (they had declared reaching 17,000,000 this year), according to the OECD.
  • In 2013, the City of Chicago had 2,706,101 inhabitants, according to the U.S. Census Bureau’s 2009-2013 ACS 5-year estimate.

Signals

Results!

  • The Netherlands has over 39 signalized intersections per billion kilometers traveled.
  • Chicago has over 167 signalized intersections per billion kilometers traveled.

Essential apps for traveling in parts of Europe

Train Radar

The Train Radar in Reisplanner Xtra (from NS, the Dutch intercity train operator) is a fun feature to show you trains nearby. The rest of the app is essential for efficient use of NS trains.

I’ve used a bunch of apps that are necessary when you’re traveling within and between countries in the parts of Europe I’m staying in an visiting this year.

The first app you should install is maps.me (iOS, Android, Amazon). It stores maps offline by downloading them from OpenStreetMap. Before leaving for the next city, download it on wifi! Each city takes up 25-60 MB on your phone, and it’s easy to delete a city’s map after you depart. This app is super fast, looks nice, has offline route planning, and can show any area in the world.

Travel apps for the Netherlands

  • Reisplanner Xtra, is essential because it has a journey planner for traveling within the country. It also shows real-time information, and even has a map of all the trains running in the country at that moment. It lists real-time OV-fiets bike availability.
  • NS International, for looking up timetables for trains between the Netherlands and France, Germany, and Belgium. You can’t buy tickets in the app, but it will link you to a shopping cart on the NS International website.
  • 9292.nl, journey planner app for all public transport in the Netherlands. It doesn’t have network maps, though, if you’re only interested in where the Rotterdam Metro goes.
maps.me gets data from OpenStreetMap, the wiki-style map that regular people around the world edit (including myself). The map improves as more people add more information!

maps.me gets data from OpenStreetMap, the wiki-style map that regular people around the world edit (including myself). The map improves as more people add more information!

Travel apps for Germany

  • DB Navigator, this has all public transport in Germany, including intercity trains. It even has intercity trains for so many other countries, regardless if that train has service in Germany. When you look up timetables for trains outside Germany, it will rarely be able to show you the price, but just seeing the schedule, and what trains are available, is important. You can buy tickets within the app, and use the app as a mobile ticket.

Other travel apps

  • Rome2rio, is remarkable because it will show you all ways to get between two cities, and it works worldwide. It incorporates timetables and maps from local transit systems, intercity coach buses, intercity trains, flights, and driving. It’s multimodal, too. It won’t book tickets, but it’s the only service I know of that focuses on showing the multitude of options – simultaneously, with prices! – for future travel planning. And it’s super fast – I think it’s getting results before you even push the “search” button.
Rome2rio showing directions between Stockholm and Malmo

Rome2rio shows results for all modes (and combined modes) between two cities, here listing 11 options on trains, buses, cars, and plans between Stockholm and Mälmo, Sweden.

  • Skyscanner, this flight-finding service has more intra-Europe airlines than services popular in the United States (like Hipmunk, Orbitz, and KAYAK).
  • Captain Train is a continental train ticketing company with a nice app that will sell you tickets for service within and between many countries.
  • Voyages-sncf, is useful if you’ll be taking fast or regular intercity trains in France, but I don’t believe it has mobile ticketing. However, you can buy tickets in the app or on the website and pick up the tickets at a vending machine at many train stations in France. This is where I bought a Thalys (high-speed train) ticket; it’s better than NS International and the Belgian equivalent from SNCB.
  • United, this airline has implemented a superior entertainment system. I call it “Netflix in the sky”. To be clear, Netflix isn’t involved. It works like this: Install the United app on your device, and then connect to the airplane’s wifi network. There’s a server in the plane that has a lot of movies and TV shows, and these stream directly to your device. This is especially useful in United’s older 767 planes that don’t have seatback screens (IFE).

What apps do you recommend and why?

There are many kinds of shared space

A guy standing in the middle of the intersection

I took this photo outside the café Memory Lane in Rotterdam because the man in the white shirt was standing in the “middle” of this intersection for a couple of minutes. Before he took this position, he was walking slowly across the intersection to the opposite corner as his car. He’s a livery driver, and he appeared to be waiting for his passenger.

This intersection is raised (the sidewalk is level with the road surface), and is uncontrolled (there are no traffic signals, stop signs, or yield signs). A bicyclist or motorist can pass through this intersection without having to stop unless someone is walking, or a bike or car is coming from their right.

This junction has no crosswalks, either. And no one honks. Especially not at the man who’s in the roadway.

Because he’s not in the roadway. He’s in a street, and streets are different. Streets are places for gathering, socializing, eating, connecting, traveling, and shopping. There was plenty of space for him to stand here, and for everyone else – including other motorists who were in their cars – to go about their business.

Oh, how Chicago land use is controlled by spot zoning

If you only had a zoning map to try and understand how the different blocks in the City of Chicago relate to their neighborhoods and the city at large, you might have the idea that the city has no neighborhoods, but is actually a collection of tiny, randomly dispersed zones of differing land uses.

And then when you walked those areas you’d find that the zones, which attempt to prescribe a land use, at least nominally, don’t have anything to do with the restaurant, housing, and commercial building mix of uses actually present.

No plan would have been devised to create a map like this.

Over the last five years, and surely over the last 14, the City of Chicago has been divided (really, split) into an increasing number of distinct zoning districts.

The city’s zoning map is updated after each monthly city council meeting, to reflect the numerous changes that the 50 alders have approved individually. (Their collective approval occurs unanimously in an omnibus bill.)

Every few months I ask the Chicago Department of Innovation and Technology (DoIT) for the latest zoning map, in the form of a shapefile (a kind of file that holds geographic information that can be analyzed by many computer programs). While Chicago has one of the country’s best open data offerings, some datasets, like zoning, don’t get updated in the catalog.

There are two ways I can analyze and present the data about the quantity of zoning districts. Both, however, show that the number of distinct zoning districts has increased. This means that the city is divided even more finely than it was just six months ago.

Analysis 1: Period snapshots

I have the zoning shapefile for five periods, snapshots of the city’s zoning map at that time. From August 2012 to now, May 2016, the number of discrete zoning districts (the sum of all B3-5, RS-1, DX-7, etc. zoning classes) has increased 7.8 percent.

Period Zoning districts change

August 2012

11,278

September 2014

11,677

3.42%

June 2015

11,918

2.02%

November 2015

12,015

0.81%

May 2016

12,162

1.21%

I collect the period snapshots to show the history of zoning at a specific address or building in Chicago, which is listed on Chicago Cityscape. For example, the zoning for the site of the new mixed-use development in Bucktown that includes a reconstructed Aldi has changed four times in four years.

aldi zoning history

Analysis 2: Creation date

The zoning shapefiles also have the date at which a zoning district was split or combined to create a new district, either with a different zoning class (RT-4, C1-1, etc.) or a different shape.

With the most recent zoning shapefile I can tell how many new zoning districts were split or combined and a record representing it was added to the list. The records start in 2002, and by the end of the year 7,717 records were created.

The following year, only 14 records were added, and in 2004, only 6. The Chicago City Council adopted a rewritten zoning code in 2004, and I guess that the zoning map was modified prior to adoption. After 2004, the number of new zoning districts picks up:

year zoning districts added by splitting/combining cumulative change

2002

7717

7717

2003

14

7731

0.18%

2004

6

7737

0.08%

2005

267

8004

3.45%

2006

497

8501

6.21%

2007

561

9062

6.60%

2008

592

9654

6.53%

2009

304

9958

3.15%

2010

245

10203

2.46%

2011

271

10474

2.66%

2012

277

10751

2.64%

2013

299

11050

2.78%

2014

397

11447

3.59%

2015

367

11814

3.21%

2016

173

11987

1.46%

none listed

175

12,162

It seems there’s a light relationship between the recession that started in 2008 and the number of zoning changes made. There are more made annually before the recession than after it. It actually seems to track with building permits (sorry, no chart handy).

Riding on a ring of Rotterdam

Map of bike ride around some Rotterdam harbors

This map shows my bike ride starting from “My flat” and going west, then south, then east, and north.

Read more frequent sabbatical updates on my Tumblr.

Two Thursdays ago I took a two hour bike ride around the western part of Rotterdam and some of its harbors. I used “GPS Recorder” for the iPhone to track my trip, and it registered that I biked a little under 38 kilometers (24 miles). The trip is notable because it uses both the Beneluxtunnel and the Maastunnel (the river is called “Maas”, pronounced like the Spanish word “mas”), and the route one takes differs depending on where they begin and end.

My bike parked on the canal in front of my flat

Sometimes I park my bike on the canal in front of my flat, and other times there’s bike parking on the sidewalk. Look at the boat; in the back you see a car. Most shippers take a car with them so they can drive around the city at their destination. Some ships have the car already in a kind of tray that can be lifted by a crane dedicated for this purpose where they dock.

I started at my flat in the Nieuwe Westen neighborhood, across the canal from Spangen, about 10 minutes west of the Rotterdam Centraal train station. From there I headed slightly north to cross the canal on a bridge that carries a main road past the Sparta football stadium. Then it heads into the suburb of Schiedam and through a very pretty nature preserve.

Most bridges are moveable. This one is a bascule bridge and those red and white poles are the gates that close the road and the bike path.

Most bridges are moveable. This one is a bascule bridge and those red and white poles are the gates that close the road and the bike path.

Beyond the nature preserve the route winds past some “havens” (harbors) and reaches the north side of the Benelux tunnel. An escalator takes you and your bike down about three levels to a tunnel that’s separated from the northbound highway by a full-height wall. There’s an elevator, also, which “bromfietsen” (scooter) riders must use.

Riding south towards the northern Beneluxtunnel entrance

The north bike/pedestrian entrance to the Beneluxtunnel.

On the south side of the harbor you pass through a village, Pernis, in the city of Schiedam. To give you a sense of how connected small towns in the Netherlands are by transit, it has its own metro rapid transit station. This is the only part of the route where there’s not a dedicated bike path.

Abandoned house in Schiedam

An abandoned house in Pernis, taken from the bike path atop a “dijk” (dike). Behind the line of trees is the Metro line C and the A4 motorway, which is heading to and from the same tunnel I came out of.

After the village, the bike path goes south and up on an overpass to cross over a railroad and then takes you down to the east. The path parallels freight railroad tracks and a highway. Huge machines upon which the AT-AT walker in Star Wars was modeled are dormant in one of the many intermodal yards on the harbor.

The bike path has to cross the highway to the south side of it, and there’s a signalized intersection to make this maneuver. I don’t think there’s such a thing as a timed intersection in the Netherlands. Every one I’ve passed through and paid attention to has a sensor of some kind. In many cases this reduces the amount of time any one person has to wait (okay, that sounds impossible, but it’s also dependent on the time of day, the traffic volumes of each mode, and which road or bike path is supposed to have priority). As I pedal toward the intersection it turns green before I get there, so I don’t have to stop.

I have to make another crossing over railroad tracks and get to the other side of a different highway. There’s another overpass this time. I stopped on my way down because some workers were carrying containers on what looked like Transformers-sized forklifts.

Bike around the Rotterdam harbor from Steven Vance on Vimeo.

After the overpass is a path under the highway, and from here and to the east most of the harbor is far away. There are office buildings on the north side of this path, and a railroad yard on the south side. Between the office buildings are tracks so trains in the yard can reach the harbor. All of the tracks cross the bike path at an angle. Signs say “let op” (caution) and because a fence and hedges separating the bike path from the yard, it seems like a train could pop out onto the bike path at any moment.

Ten minutes later and I’ve reached a neighborhood. On the harbor side is what looks like housing for workers, and the other side is residential. I can see the Maastunnel’s ventilation shaft. One more corner turned and I can see the little house where “fietsers” (cyclists) and “voetgangers” (pedestrians; “voet” is pronounced like foot) take the escalator down.

There are separate levels for cyclists and pedestrians. It’s unclear where the road tunnel is, whereas the low rumbling noise I heard in the Beneluxtunnel gave away its position. The tunnel slopes downward toward the middle, so you can gain a little momentum but it seemed harder in the Maastunnel than in the Benelux tunnel because of what felt like a headwind (maybe the ventilation system is strong).

Maastunnel

Descending into the Maastunnel so I can ride north to home.

The Maastunnel was built from 1937 to 1942, and its 74-year-old age shows: the escalators have fascinating wooden steps. The walls along the escalators are adorned with photographs showing people using the tunnel, and other scenes of building the tunnel. The Beneluxtunnel was built in two phases, with the first group of two tunnels opening in 1967, and the second group of six tunnels, including the bike and pedestrian tunnel, in 2002.

Now that I’ve been riding around Rotterdam for four weeks I can always get home without consulting a map and it’s an easy ride home from the north side of the Maastunnel to home, and I can take several different routes that are all about the same distance and time.