Page 36 of 171

The U.S. DOT should collaborate with existing “National Transit Maps” makers

March 31, 2016 / / 1 Comment

The U.S. DOT demonstrated one idea for how a National Transit Map might look and work at a conference in February.

The Washington Post reported this month that the United States Department of Transportation is going to develop a “National Transit Map” because, frankly, one doesn’t exist. The U.S. DOT said such a map could reveal “transit deserts” (the screen capture above shows one example from Salt Lake City, discussed below).

Secretary Anthony Foxx wrote in an open letter to say that the department and the nation’s transit agencies “have yet to recognize the full potential” of a data standard called the General Transit Feed Specification that Google promoted in order to integrate transit routing on its maps. Foxx described two problems that arose out of not using “GTFS”.

  1. Transit vehicles have significantly greater capacity than passenger cars, but are often considered just vehicles because we are unable to show where and when the transit vehicles are scheduled to operate. The realistic treatment of transit for planning, performance measures, and resiliency requires real data on transit system operations.
  2. One of the most important social values of transit is that it makes transportation available to people who do not have access to private automobiles, and provides transportation options for those who do. Yet, we cannot describe this value at a national level and in many regions because we do not have a national map of fixed transit routes.

“The solution is straightforward”, Foxx continued, “[is] a national repository of voluntarily provided, public domain GTFS feed data that is compiled into a common format with data from fixed route systems.”

The letter went on to explain exactly how the DOT would compile the GTFS files, and said the first “collection day” will be March 31, this week. As of this writing, the website to which transit agencies must submit their GTFS files is unavailable.

What Foxx is asking for has already been done to some degree. Two national transit maps and one data warehouse already exist and the DOT should engage those producers, and others who would use the map, to determine the best way to build a useful but inexpensive map and database. Each of the two existing maps and databases was created by volunteers and are already-funded projects so it would make sense to maximize the use of existing projects and data.

“Transitland” is a project to host transit maps and timetables for transit systems around the world. It was created by Mapzen, a company funded by Samsung to build open source mapping and geodata tools. Transitland is also built upon GTFS data from agencies all over the world. Its data APIs and public map can help answer the question: How many transit operators serve Bay Area residents, and what areas does each service?

For the United States, Transitland hosts and queries data from transit agencies in 31 states and the District of Columbia. In Washington, D.C., Transitland is aware of four transit agencies. It’s a great tool in that respect: Not all of the four transit agencies are headquartered in D.C. or primarily serve that city. The app is capable of understanding spatial overlaps between municipal and regional geographies and transit agencies.

Transitland has a “GUI” to show you how much transit data it has around the world.

“Transit Explorer” is an interactive map of all rail transit and bus rapid transit lines in the United States, Mexico, and Canada. Yonah Freemark, author of The Transport Politic, created the map using data culled from OpenStreetMap, the National Transit Atlas Database (administered by the DOT and which shows fixed-guideway transit), and his own research. I wrote the custom JavaScript code for the Leaflet-powered map.

No other agency or project has collected this much data about fixed-guideway transit lines in any of the three countries, since the map includes detailed information about line lengths, ridership, and other characteristics that are not included in GTFS data. Transit Explorer, though, does not include local bus service or service frequencies, which the DOT’s map may if it incorporates the full breadth of GTFS data.

Transit Explorer also goes a step further by providing data about under construction and proposed fixed-guideway transit lines, which is information that is very relevant to understanding future neighborhood accessibility to transit, but which is not available through GTFS sources.

Finally, “GTFS Data Exchange” is a website that has been storing snapshots of GTFS feeds from agencies around the world for almost a decade, or about as long as GTFS has been used in Google Maps. The snapshots allow for service comparisons of a single agency across time. For example, there are over 100 versions of the GTFS data for the Chicago Transit Authority, stretching back to November 2009; new versions are added – by “cta-archiver” – twice a month.

Josh Cohen, writing in Next City, highlighted the significance of Google’s invention of GTFS, saying, “Prior to the adoption of GTFS, creating such a map would’ve been unwieldy and likely produced an out-of-date product by the time it was completed.” The DOT’s own National Transit Atlas Database includes only fixed-guideway (a.k.a. trains) routes, and hasn’t been updated since 2004.

Not all GTFS feeds are created equal, though. Some transit agencies don’t include all of the data, some of which is optional for Google Map’s purpose, that would make the National Transit Map useful for the spatial analysis the DOT intends. Many agencies don’t include the “route shapes”, or the geographic lines between train stations and bus stops. Researchers are able to see where the vehicles stop, but not which streets or routes they take. Foxx’s letter doesn’t acknowledge this. It does, however, mention that transit agencies can use some federal funds to create the GTFS data.

David Levinson, professor at the University of Minnesota, believes the map will bias coverage (geographic reach of transit service) over frequency (how many buses are run each day that someone could ride).

The U.S. DOT’s chief data officer, Dan Morgan, whom I met at Transportation Camp 2015 in Washington, D.C., presented at the FedGIS Conference this year one idea to demonstrate coverage and frequency in Salt Lake City, using the GTFS data from the Utah Transit Authority.

Levinson also tweeted that it will be difficult for a national map to show service because of the struggles individual transit providers have symbolizing their own service patterns.

Foxx’s letter doesn’t describe how planners will be able to download the data in the collection, but whichever app they build or modify will cost money. Before going much further, and before spending any significant funds, Foxx should consult potential users and researchers to avoid duplicating existing projects that may ultimately be superior resources.

Foxx can also take advantage of “18F” a new agency within the General Services Administration to overcome government’s reputation for creating costly and difficult to use apps. The GSA procures all kinds of things the federal government needs, and 18F may be able to help the DOT create the National Transit Map (and database) in a modern, tech and user-friendly way – or write a good RFP for someone else to make it.

Look for the National Transit Map this summer.

What should this area in Chicago be called?

February 15, 2016 / / 1 Comment
The area is generally bounded by Harrison Street or Congress Parkway, Dan Ryan Expressway or Desplaines Street, Roosevelt Road, and the Chicago River.

The area is generally bounded by Harrison Street or Congress Parkway, Dan Ryan Expressway or Desplaines Street, Roosevelt Road, and the Chicago River.

Currently it’s called the South Loop, which is a neighborhood name. It’s in the “Near West Side” community area. See how the City of Chicago mapped the “South Loop” in the past when it used to keep track of neighborhood boundaries.

I think it should have a new name. It should not be called the South Loop because the commonly identified center of the South Loop is probably somewhere between Roosevelt and Harrison, and Michigan Avenue and State Street, very far from this area. It just might be the Roosevelt CTA station, which has over 12,000 boardings a day.

Saying that you’re going to some business that’s west of the river and saying that the business is in the South Loop would confuse a lot of people as to what its nearby.

It’s more of an industrial and commercial area that gained a lot of new big box (faceless) retail in the 2000s, so very few people live there. There are several stores that exist that came decades before the big box outlets; for fabric, clothing, shoes, and suits. It’s probably these independent store owners that can point to an older neighborhood name as they were the center of consumer commerce in this area.

It’s easy to give it a new name. Most of the housing is north of Harrison Street. It’s difficult to figure out how many people live here because the block groups for this area include more than the area in question.

It’s easy to argue that because of the land uses, it really has no current identifiable “place” or pattern that attracts people. I’d like to know more about its history and, South Loop being a modern name, its previous names.

The rate of change on city streets: USA versus the Netherlands

February 15, 2016 / / 0 Comments
ThinkBike 2013

One of the people in this photo is Dutch. We’re on the Dearborn bike route installed downtown in 2012. The next downtown protected bike route was installed in 2015 serving a different area. However, the Dearborn bike route has become so popular that it’s size and design (t’s a narrow, two-way lane) are insufficient for the demand (who knew that bicycling in a city center would be so high in demand, especially on a protected course?) and there are no plans to build a complementary facility to improve the conditions.

My friend Mark wrote the following paragraph on his blog, BICYCLE DUTCH, relating the need to change a city and its streets to the way families change the contents of essential parts of their homes. In other words, cities and streets are like our living rooms and they must also change as we change.

Think about your living room, chances are you change it completely every 15 to 20 years. Because you need a wider sofa for the expanding family, or because you rightfully think that table has had its best years. Maybe the extra big seat for granddad is sadly not needed anymore. Of course, things can’t always be perfect: you have a budget to consider and it is not so easy to change the walls. Replacing things does give you the opportunity to correct earlier mistakes and to get the things which are more useful now. While you are at it, you can also match the colours and materials better again. Our cities are not so different from our living rooms. Just as families grow and later decrease in size again when the children leave the house, the modal share of the different types of traffic users changes over the years. These shifting modal shares warrant changes to the street design. So you may need some extra space where it was not necessary before, but if you see less and less of a certain type of traffic, its space can be reallocated to other road users.

What I really want to talk about is the rate of change in the Netherlands. I’ve visited Mark’s home in s’Hertogenbosh (Den Bosch), and we’ve walked around Utrecht.

One thing he told me, which is widely evident, is that the Netherlands is always renewing its streets. Or it has been for decades (maybe since World War II). They update street design standards regularly and streets that no longer meet these designs (or a few generations back) are updated to meet them.

Now, the two changes – updating the standards and updating the streets – don’t happen so gloriously hand in hand. Just like in the United States it takes a couple of years to come up with the right design.

The difference between our two countries is the regularity in updating the designs, and the regularity in updating streets.

I’ll lead with one example in Chicago and ask that you tell me about projects in your city that repair what’s long been a pain in the ass.

An intersection in the Wicker Park neighborhood got modern traffic signals, added crosswalk signals (there had never been any), and a stupid, sometimes dangerous little island removed. One of the four legs didn’t have a marked crosswalk. The state of Illinois chipped in most of the cost of the update – this was known at least four years before the construction actually happened.

When I wrote a blog post about the project for Grid Chicago in 2012, I found a photo from 1959 that showed the intersection in the same configuration. I also wrote in that post that the construction was delayed from 2012 to 2013. Well, it got built in 2014.

Milwaukee & Wood ca. 1959

Intersections like this – with difficult-to-see traffic signals that motorist routinely blow past, missing crosswalks, and curb ramps that aren’t accessible – persist across Chicago in the state they’ve been in for 55 or more years.

The “reconstructed bicycle route” that Mark discusses and illustrates in his blog post is known to have been updated at least once a decade. He wrote, “pictures from 1980, 1998 and 2015 show how one such T-junction was changed several times. The protected intersection went through some stages, but having learned by trial and error, the design we see now is one that fits the present ‘family’ best.”

Three books by well-known city transportation planners have all been published within months of each other. I read and reviewed Sam Schwartz’s “Street Smart”, and I’m reading Janette Sadik-Khan’s “Street Fight“. Gabe Klein’s “Startup City” is the third. All of them advocate for new designs to match the changing attitudes and needs cities have. Actually, the needs of the cities haven’t really changed, but our attitudes and policies – and the politics – around how to update cities has evolved.

I don’t know what can spur all of these seemingly minor (they’re no Belmont Flyover) infrastructural updates. I don’t think a lack of money is to blame. I think a lack of coordination, staffing, and planning ensures that outdated and unsafe designs remain on city streets.

P.S. The Netherlands “renewal” attitude isn’t limited to streets. The Dutch national railway infrastructure company “ProRail” (which is “private” but owned by the government) has been completely replacing all of the primary train stations. The Dutch have been rebuilding dikes and building flood control projects for decades, many under the common name “Delta Works”.

Here’s a photo in Nijmegen where the government was building a new, bypass canal that would ease a shipping route, create a controlled flood area, a new recreation area, but that would also displace homes.

Easily find TIF districts in your ward but good data on their current obligations is missing

February 9, 2016 / / 0 Comments
Ald. Ameya Pawar speaks to the Board of Education (WBEZ/Bill Healy)

Alder Ameya Pawar is willing to give back TIF money from projects in the 47th Ward to the Chicago Public Schools. Photo: Bill Healy for WBEZ

Alders Ameya Pawar (47th), Pat O’Connor (40th), Joe Moreno (1st) and Pat Dowell (3rd) are introducing a resolution at today’s budget committee to ask all alders to choose and stop certain TIF-funded projects in their wards (instructions on how to find TIF districts are below) so that the money can be declared as a surplus.

Part of the surplus would be given to the Chicago Public Schools, where it would have gone had property tax revenue never been diverted to the TIF.

What is TIF? Quick answer: All of the new property tax revenue generated after the date the “Tax Increment Financing” district took effect goes to a fund that can only be spent on certain kinds of projects within that district, while all of the property tax revenue generated at the amount that was collected just before the district took effect continues to go to the city, the school district, and other taxing districts.

Alder Pawar has already picked $16.5 million worth of projects that he’s stopping in order to give back the money to schools.

It’s still very difficult to know how much unallocated money is in a TIF district’s bank account (what is essentially surplus). It’s also still very difficult to figure out which projects have had money allocated to them (called an obligation) but not yet spent.

Patty Wetli reported in DNAinfo Chicago yesterday:

The resolution works as a companion to legislation [actually a resolution] previously introduced by Ald. Carlos Ramirez-Rosa (35th), which called for the city to funnel unallocated TIF dollars back to CPS. [read the resolution]

Rather than allowing Mayor Rahm Emanuel and his budget office to decide where to sweep for TIF surplus dollars, Pawar said aldermen should be leading the effort, stating which TIF projects they’re willing to give up.

Instructions to find TIF districts in your ward

You can use Chicago Cityscape’s Places maps to easily find which TIF districts overlap any of the 50 wards.

  1. Find your ward. Use the 3rd Ward, Alder Pat Dowell because Wetli already explored the 47th Ward TIF districts.
  2. Scroll down to the table called “3rd Ward, Ald. Pat Dowell’s Nearby Places”.
  3. Type “TIF district” in the table’s search form. Gasp at the fact that there are 17 districts that overlap the 3rd Ward.
TIF districts that overlap the 3rd Ward (Alder Dowell)

This screenshot shows 10 of the 17 TIF districts that overlap the 3rd Ward.

Let’s look deep at the TIF district called “24th/Michigan”, 76.7 percent of which is in the 3rd Ward, has several millions of dollars in obligations to vaguely-described projects, to continue paying for already-built projects, or future projects. This includes $6.4 million for the Cermak Green Line station and $4.5 million annually for an unspecified project at the National Teachers Academy pursuant to an intergovernmental agreement with the Chicago Public Schools.

24th/Michigan TIF district

A map of the 24th/Michigan TIF district.

The National Teachers Academy project isn’t even on the city’s mildly useful TIF projects map.

Alder Dowell has her work cut out for her to find projects that are in both the 3rd Ward and in one of the 17 intersecting TIF districts that she would be willing to cut so that the Chicago Public Schools are less broke. The same arduous but noble task belongs to all of the other alders as well.

Adrienne Alexander tells ChiHackNight what she does as a union lobbyist

February 3, 2016 / / 0 Comments
Adrienne Alexander speaking to ChiHackNight at Braintree. Photo by Chris Whitaker.

Adrienne Alexander speaking to ChiHackNight at Braintree. Photo by Chris Whitaker.

ChiHackNight is Chicago’s weekly event to build, share & learn about civic tech. Me and 100 of my friends (50 of whom are new every week!) meet in the Braintree auditorium on Tuesday nights at 6 p.m. on the 8th floor of the Merchandise Mart. Sign up for notifications on upcoming presenters. The content of my blog post is derived from real-time note taking.

Adrienne Alexander, or @DriXander on Twitter, came to ChiHackNight last night to tell us about her experience as a lobbyist working for the state’s largest public employees union. She lobbies the Chicago City Council and the Illinois state legislature for bills and budget modifications that would impact the members of the American Federation of State, County and Municipal Employees council 31.

Members of AFSCME (afs-me) are staff at numerous Chicago city departments and in state government. Alexander watches new bills that come in and analyzes what their impact might have on its members.

She gave the example of the privatization legislation that she lobbied, the Privatization Transparency and Accountability Ordinance, for three years. Salon reported on the PTAO in 2013, saying, “[it] is designed to help prevent abuses of privatization, and avoid the kinds of deals negotiated in the past that were intended to help close budget deficits but turned out to be massive boons for corporations and Wall Street while losing long-term revenue for the city.”

Alexander, however, had been battling efforts to privatize city functions earlier. In 2011, she said, Mayor Rahm Emanuel was trying to privatize the water billing group. This would have been realized by amending the budget and reducing the amount budgeted for that group of staff.

“We represented those folks”, she said. “It got a lot of aldermen upset, it was supposed to save $100,000 annually but also lay off 40 people.” It didn’t happen. And neither did the 311 privatization that Emanuel proposed in 2015 for the 2016 budget. 

Alexander said that it was hard to keep the press focused on this issue for three years, because nothing was happening. “If there’s nothing happening, they would say, then there’s nothing to write about”, she said.

It was passed in November 2015. “It’s hard to get things passed that don’t have the mayor’s support,” Alexander said. “A lot of the calls the aldermen get are not about policy, but about alleys, trash, tree trimming, these very ‘quality of life’ issues specific to their ward”. 

There’s a good reason – for them –in all of this, she explained. “You can be the most citywide alderman, really focused on policy, but if you don’t take care of the stuff in your ward then you will lose your election.”

Alexander gave some advice to ChiHackNight members who are building tools that explain why some policies aren’t working and should change. Claire Micklin asked how to get alders to “mobilize on and care about policy issues, and can they affect policy change from the ground up if the mayor isn’t necessarily generating or supporting that policy issue?”

Micklin led the development of “My Building Doesn’t Recycle”, a map where Chicagoans can report that their multi-unit building doesn’t have a third-party recycling service (required if the tenants of a building with 5 or more units request it).

Alexander said “I think there’s not so much a culture of [alders generating their own policy initiatives] here, but I think it’s possible”.

She advised Micklin, and anyone else who’s working to change a city policy, to:

  • Choose your sponsor carefully.
  • Be clear of what your expectations are, have a plan so you can help guide them
  • Have grassroots support, so it’s more than one person coming and talking to them about it
  • Make sure they’re hearing about it from different places, and find out who else they’re listening to.

In each ward, she said, there’s at least one organization that an alder really cares about, so if that organization is making something an issue, or it would be beneficial to that organization, then they could be helpful.

I’ve seen this kind of organization-derived influence a lot in property development matters. If there’s a neighborhood-based organization that purports to represent resident issues in a specific boundary, then the alder who’s receiving a new property development proposal will ask that the developer meet with the organization to gain their approval. I’ve seen situations, especially in the 1st Ward, where the alder supports the development if the organization supports the development.

Alexander concluded her response to Micklin’s question, saying, “It’s really helpful if you can do a lot of the legwork, and you can get the alderman plugged into the process.”