Page 73 of 171

Testing the Abus Bordo “folding” lock

September 9, 2012 / / 28 Comments
Testing the Abus Bordo lock

Abus Bordo 6500 Granit X-Plus 85cm locked around my WorkCycles Fr8’s frame, front wheel, and the standard Chicago bike rack (a u-rack).

Updated May 2016: After having two keys break inside the lock, I can no longer recommend it. While Abus replaced the first lock for free, I didn’t bother asking them to replace the second lock because I felt the problem would happen again. The keys broke, in part, because of the way I turned the key, as the lock rested, putting a lot of pressure on, and bending, the key. I did it like this so I could detach the lock with one hand. I now recommend chain locks because they fit around all kinds of fixed objects. Abus locks are still really good quality. I’ve been using this Abus chain lock for two months and I like it – it won’t have the key breakage problem because I have to grab and hold the lock before I can insert the key.

—–

I’ve been using the Abus Bordo 6500 Granit X-Plus lock for my Fuji Royale fixed gear bicycle for about three weeks now. Previously I had been using a Kryptonite Evolution Series 4 Standard u-lock. The Abus Bordo lock style is very hard to describe; Abus calls it the “foldable lock”. It has a small block for the locking mechanism, and 6 rotating and connecting bars (“links”). One bar is fixed to the locking block, and the last bar gets hooked into the other side of the locking block. (They have the unique ability to be locked to another Bordo, in a chain of them.)

I’m not a lock designer, nor a bicycle thief, so I cannot talk about the advantages or disadvantages of this design over another lock design (like the ubiquitous u-lock, the style I’ve been using for six years). I can tell you its advantages on use: it’s a lot easier to use than a u-lock as it makes possible additional locking situations. The 6 flexible bars (or links) means you can wrap the lock around a variety of bike rack sizes and shapes, through two bikes, or through your bike’s frame and wheel (which is annoying to do with u-locks).

It took me a few days to find the fastest way to lock my bike with the Bordo and I think I’ve found it. Unlock the locking block and let all of the 6 bars drop towards the ground. Then thread the first one through your wheel (no handling necessary), grab it from the other side of your bike, pull it around the fixed object to which you’re locking, and pull it towards the locking block. It takes the same or less time to lock with the Bordo than with a u-lock. U-locks are difficult to get through a front wheel and frame unless the bike rack is empty and you’re the first one there, meaning you get to decide how to place your bike against the rack’s metal tubes.

Testing the Abus Bordo lock

I can fairly quickly lock with a Bordo by slipping the open link through the wheel spokes first, then around the fixed object. Then with both hands I grab each end of the lock and insert the open link into the locking bracket, shuffling them around the bike frame until the open link can reach the locking bracket. The Bordos are covered in a rubber-feeling plastic that protects your frame’s cover/coating.

The specific Bordo model I’ve been using is the Granit X-Plus 6500, which weighs a little more than the standard model (see weight specifications below). It comes with a carrying case that straps to any tube on your bicycle. There are two ways to mount the case: temporary and semi-permanent. With the temporary method, you wrap the velcro straps around the seat tube (reduce the chance for theft of the carrier by wrapping zip ties on it). By having it attached this way, you can move it to another bike in 30 seconds. The semi-permanent method lets you screw the case into braze-ons on the tubes, typically ones meant for a water bottle cage.

My new bike, a WorkCycles Fr8, provides me a new opportunity to test the folding lock’s abilities. The Fr8 has very wide tubes and large wheel rims and tires. I suspect that my Kryptonite u-lock won’t be able to wrap around the front wheel, frame, and the fixed object to which I’m locking. I tested the Bordo: it can definitely hold the front wheel, frame, and fixed object, but only if I’m really close to the fixed object. I haven’t tested the u-lock yet.

For people who are concerned about weight, they are as follows:

  • Abus Bordo 6000 75cm, 1.03 kg
  • Abus Bordo 6000 90cm, 1.22 kg
  • Abus Bordo Granit X-Plus 6500 85 cm, 1.58 kg
  • Kryptonite Evolution Series 4, 1.70 kg

The top-of-the-line Abus Bordo still weighs less than the Kryptonite Evolution Series 4. Kryptonite’s New York Standard weighs 1.97 kg. See the full product line up on Abus’s website and see Kryptonite’s line up of u-locks.

This review shouldn’t be taken as a dis-recommendation of the Kryptonite u-locks. I like them – I have three – and they may have prevented theft of the various bicycles I’ve used for 6 years; the lock in combination with other factors prevented theft, which can’t be known unless my bike was monitored 24/7 (in other words, have no idea if anyone’s tried to steal my bicycles). The Bordo lock’s sole disadvantage is its price: $100 for the short version, and $117 for the 15cm longer version. The Granit X-Plus is $153. My personal bike locking strategy is to buy the most expensive lock you can afford and to make your bicycle harder to steal than the bikes you park next to. The Bordo should do that.

My only gripe about the lock is the velcro strap on the carrier: it’s long and sticks out to the side a little and scratches my leg on every pedal. I used a zip tie to hold it down; I would prefer a kind of slot to insert the extra velcro to keep it out of the way.

Abus was a sponsor of the 2012 Cargo Bike Roll Call, donating a Bordo 6100 combination lock to the raffle. They gave me a second lock to test, a Bordo 6000, 75cm. However, I gave that lock to Brandon Gobel and I was given the lock I’m using in this review by Harry (Hans) of Larry vs. Harry. Here’s Brandon’s short review:

I like this lock for its compact size and light weight, while maintaining strength. It takes longer to lock, unlock and put in the frame holster than a mini u-lock, though. [For comparison, the Kryptonite Mini weighs 0.98kg and the lock Brandon is using is 1.03kg.] I carry the mini u-lock in my back pocket so it’s slightly more convenient. However, the Bordo is much more versatile, and you can wrap it around objects that are larger than the typical Chicago bike rack.

Testing the Abus Bordo lock

This photo of a Kryptonite mini lying on top of the Bordo 6000 75cm shows the open areas of each lock. The Bordo has a significantly larger open area and weighs less. 

Both of us are also using an Abus brand rear-wheel lock. Mine came with the WorkCycles Fr8 while Brandon’s was a gift from Harry. We both appreciate the piece of mind and ease of use of the rear-wheel locks. See all photos in the Abus lock review gallery.

 

Buying links

Reverse traffic planning

September 3, 2012 / / 0 Comments

Nothing revolutionary, just a clever design. It’s a t-shirt worn by Bicycle Innovation Lab co-founder Lasse Schelde in Copenhagen. I met Lasse at the Svagerløb Danish Cargo Bike Championships on August 18, 2012 (see all photos). The graphic is an upside-down pyramid. From the top it moves to the bottom with decreasing area as follows:

  • Walking
  • Cycling
  • Utility Bicycles
  • Public Transport
  • Taxi/Transport
  • Car Sharing
  • Own Car
  • Airplane

There are many ways to interpret this graphic, but I see it as one of decreasing efficiency in moving people (disregarding nuances of population and distance).

A photo of me cycling in the team relay race on the world’s fastest cargo bike. 

Lasse and I were on the same team for the relay race. Miche and Brandon Gobel all rode his Bullitt. I started first so I wouldn’t have to carry any of the luggage (which consisted of two car tires and a wooden Carlsberg beer crate). The race was hosted on the Carlsberg brewery lot.

Customer reviews for my bike map app

July 15, 2012 / / 0 Comments

Only reviews left for the current version are displayed on the iTunes Preview page, and the default view of the iTunes Store. 

I’m appreciative of the two reviews people have left for my app – it’s a bike map for Chicago stored in your phone, download in iTunes. Their positivity and the slight increase in sales this past week has increased the ranking of my app. I don’t know what the ranking means.

When my app first ranked, in its Reference category, it was 385, then 289, and now stands at 315. I’m not sure on what factors the ranking is based, but I’ve gathered some clues from other bloggers:

[In addition to the number of downloads, other] factors play into the ranking equation such as how long the app is opened as the active app and how often the app is opened.

There’s no mention of reviews on that page, but I found another article that mentions more ways to improve your app, which includes having positive reviews. (Another factor it mentions is frequently updating the app.)

I’d like to hear from my app’s users what their feedback is before they leave a review in the iTunes Store. I can address issues directly with users and discuss how they can (or cannot) be incorporated in a future update to the app. You can send your feedback to me, and your love to the app store. (A major downside of the customer reviews process in the iTunes Store is the inability for the developer to respond.)

My app’s received two reviews (both 5 stars!) so far:

Saw this app being discussed on Twitter and thought I’d check it out. So, on the hottest day of 2012, I jumped on my bike and rode around my area checking out the apps features. Color me impressed! I rode to a few areas that I was not over familiar with and activated the app to peruse my options via my bike (or CTA). I look forward to using this on my far south/far north bikiing adventures soon!

The first reviews about the first version:

Would be great if it could locate on the map with GPS. Also if it could zoom out more. These bike lanes have come a long way recently. There are some really nice new places to ride like the cycle track on Kinzie. But there are also some old routes out there that are great biking such as the Boulevard System (Humboldt, Logan, Palmer Sq) that you could show on your map. And it says it supports German, but it is in English 🙂

The part about my app being available in German was true for v0.1, but I’ve fixed that for v0.2. If you’re going to leave a review, I’d like to leave you with this advice, for I feel it makes for a constructive review:

  1. Describe what is good about the app, and what you like about the app.
  2. Describe how you’ve used the app.
  3. Suggest ways the app could improve.

This was what the first version looked like. It wasn’t very good. 

How to split a bike lane in two and copy features with QGIS

July 13, 2012 / / 0 Comments

A screenshot of the splash image seen on users with iPad retina displays in landscape mode. 

To make the Chicago Offline Bike Map, I need bikeways data. I got this from the City of Chicago’s data portal, in GIS shapefile format. It has a good attribute table listing the name of the street the bikeway is on and the bikeway’s class (see below). After several bike lanes had been installed, I asked the City’s data portal operators for an updated shapefile. I got it a month later and found that it wasn’t up-to-date. I probably could have received a shapefile with the current bikeway installations marked, but I didn’t have time to wait: every day delayed was one more day I couldn’t promote my app; I make 70 cents per sale.

Since the bikeway lines were already there, I could simply reclassify the sections that had been changed to an upgraded form of bikeway (for example, Wabash Avenue went from a door zone-style bike lane to a buffered bike lane in 2011). I tried to do this but ran into trouble when the line segment was longer than the bikeway segment that needed to be reclassified (for example, Elston Avenue has varying classifications from Milwaukee Avenue to North Avenue that didn’t match the line segments for that street). I had to divide the bikeway into shorter segments and reclassify them individually.

Enter the Split Features tool. QGIS is short on documentation and I had trouble using this feature. I eventually found the trick after a search that took more time than I expected. Here’s how to cut a line:

  1. Select the line using one of the selection tools. I prefer the default one, Select Features, where you have to click on the feature one-by-one. (It’s not required that you select the line, but doing so will ensure you only cut the selected line. If you don’t select the line, you can cut many lines in one go.)
  2. Toggle editing on the layer that contains the line you want to cut.
  3. Click Edit>Split Features to activate that tool, or find its icon in one the toolbars (which may or may not be shown).
  4. Click once near where you want to split the line.
  5. Move the cursor across the line you want to split, in the desired split location.
  6. When the red line indicating your split is where you desire, press the right-click mouse button.

Your line segment has now been split. A new entry has been added to the attribute table. There are now two entries with duplicate attributes representing that together make up the original line segment, before you split it.

This screenshot shows a red line across a road. The red line indicates where the road will be split. Press the right-click mouse button to tell QGIS to “split now”.

After splitting, open the attribute table to see that you now have two features with identical attributes. 

Copying features in QGIS

A second issue I had when creating new bikeways data was when a bikeway didn’t exist and I couldn’t reclassify it. This was the case on Franklin Boulevard: no bikeway had ever been installed there. I solved this problem by copying the relevant street segments from the Transportation (roads) shapefile and pasted them into the bikeways shapefile. New entries were created in the attribute table but with blank attributes. It was simple to fill in the street name, class, and extents.

Chicago bikeways GIS description

Bikeway classes (TYPE in the dataset) in the City of Chicago data portal are:

  1. Existing bike lane
  2. Existing marked shared lane
  3. Proposed on-street bikeway
  4. Recommended bike route
  5. Existing trail
  6. Proposed off-street trail
  7. Access path (to existing trail)
  8. Existing cycle track (also known as protected bike lane)
  9. Existing buffered bike lane

It remains to be seen if the City will identify the “enhanced marked shared lane” on Wells Street between Wacker Drive and Van Buren street differently than “existing marked shared lane” in the data.

I found the Milwaukee Avenue peloton this morning

July 12, 2012 / / 0 Comments

You can spot at least 10 people bicycling southbound on Milwaukee Avenue through Bucktown. 

I work from home and don’t commute downtown like I believe a majority of cycle commuters do. I was bicycling towards the Wicker Park-Bucktown Chamber of Commerce office for an 8:30 AM meeting of the Special Service Area’s transportation committee. We talked about bike racks, street furniture, and the progress of Open Streets. We partnered with Active Transportation Alliance to put that on, September 16, a Sunday and the week after Open Streets on State Street.