Page 80 of 171

Figuring out how many CMAQ projects are for roads

Simplified, the purpose of Congestion Mitigation and Air Quality (CMAQ) grant is to fund projects that reduce congestion and improve air quality. This usually means bicycle, pedestrian, and transit facilities and vehicles. But it also means road projects. Like intersection widening, new signals, changes to signal programming, and “signal interconnect” (timing the signals to cooperate with each other to have some free flowing traffic). It can also mean making grade separations at railroad tracks to eliminate backups when trains cross. However, not everything is infrastructure: there’s also marketing, encouragement, analysis, bike sharing, and education.

In a conversation I was having last night with some transportation advocate friends, one joked that most of CMAQ funds road projects. I agreed (probably because the irony of reducing congestion by making higher capacity roads was funny to me), and we moved on to other topics. I set out verify the actual distribution share for the six-county region in Northeastern Illinois.

I spent almost an hour converting the Chicago Metropolitan Agency for Planning’s CMAQ 2012-2016 projects list from PDF to Excel and then quickly identified every project as being “road” or “not road”. I tallied the amount of proposed CMAQ funding for the projects to get the answer: road projects take up 25.7% of CMAQ funding.

But I can’t stop there! Now that I have CMAP’s data in a spreadsheet, I can get the average of Daily VOC eliminated for road and non-road projects, as well as the estimated cost per VOC kilogram eliminated.

On average, non-road projects have a lower cost per VOC kilogram eliminated ($4,109.37 versus $9,472.90). And non-road projects on average eliminate 19.7 times more kilograms of VOC daily (5.918 kg versus 0.301 kg for road projects).

There are some disclaimers! These are all estimates and not every project has received funding. Also, projects are not selected solely on cost per kilogram of VOC eliminated, or daily VOC eliminated. I’d also like to see estimates on the number of people affected by each project.

You can check my math by downloading my modified projects list (XLS).

The first raised crosswalk I’ve seen in Illinois

The raised crosswalk, a view looking northeast, from the sidewalk. 

Forest Park was a client of mine in 2012 via my work for Active Transportation Alliance; they’re a technical consultant for cities that had grants from the Communities Putting Prevention to Work program. I visited the village with one of their staffers to identify great locations for bike racks (that also included advice on their existing rack inventory, and suggestions for exactly which models to buy).

We would drive around town and then stop and walk a lot. One place where we did a lot of walking was in their downtown, on Madison Street (the same Madison Street as in Chicago). I was pleasantly surprised that their signage reflected the “stop for pedestrians in crosswalk” law, replacing the now-irrelevant “yield for pedestrians in crosswalk” signs. And to top it off, they had talking and lighted signals at some of the crosswalks. I do not support any widespread installation of these: I think they help move our culture in a direction that perpetuates the low respect we have for pedestrians. I believe there are other ways to enforce driver compliance that do not require this kind of equipment.

Forest Park has installed one of those ways: it’s a raised crosswalk (also known as a speed table). It looks like a speed hump, but is much wider, has a flat top, and carries a marked crosswalk (see my article on Grid Chicago “What is an unmarked crosswalk?“). It causes drivers to slow down and has an added – subjective – benefit of intimating that the driver is entering a “protected space”, one for people on foot and that it should be respected. They bring the roadway up to the pedestrian’s level instead of dipping the sidewalk down to the driver’s level.

I don’t know of one in Chicago, but three guys are working to get several installed in a Logan Square traffic circle redesign.

Note: If you are interested in knowing exactly which models of bike racks to buy, learn more at Simple Bike Parking, or contact me directly. I may charge a fee.

The raised crosswalk as seen from a car moving westbound. 

No more drive throughs, please

People drive their cars in and out of the parking lot for Micro Center, Joann Fabrics, and other stores in this strip mall on Elston Avenue. This design is almost inherently unfriendly to bicycle and walking transportation. But it doesn’t have to be. 

One reason that makes dense, urban areas pleasant and pleasurable is their walkability, variations in land uses, and architectural designs. When you walk down Belmont Street at Sheffield and encounter a new business or restaurant every 25 feet, you’re interested. Interested and curious in what others are doing, what new food you can eat, or what you will experience.

Photo of Belmont Street shopping and graffiti by Oscar Arriola. 

The opposite of this is Elston Avenue, between Ashland and Western Avenues. This stretch is marked by curb cuts, driveways, and seas of parking. Add in the lack of a bus route or nearby ‘L’ station, and you’ve got an environment that’s downright hostile to users of sustainable transportation modes.

I am still doing research for my article on the “pedestrian street” designation. In my research, I’ve learned a lot about the Zoning Board of Appeals, Special Use Permits, and drive throughs. I still haven’t been able to locate studies or reports about the effects drive throughs have on traffic or neighborhoods.

Just in the past 5 days, I’ve found out about the following news:

  1. The McDonald’s at Western Avenue and Milwaukee Avenue (1951 N Western Avenue) is seeking a special use permit. For what, I don’t know. It could just be a rumor. This is the same McDonald’s whose drive through someone so desperately needed to access and almost hit me with their SUV (see image below).
  2. Nodarse Family, LLC, is seeking a special use permit at 1646-1663 N Western Avenue for “the establishment of a one-lane drive-thru facility to serve a proposed 1-story restaurant”.

When I look at Street View for the 1646-1663 N Western location I see several homes and an empty lot with a car parked in it. The address seems to be a mistake, as 1663 is across the street. And even though this is a residential area, it’s zoned B3-2*.

In Mayor Emanuel’s “interest” (more like a selective, here not there, interest) for transparency, I’d like to see information that’s easier to find and process. For news from Zoning Board of Appeals, a blog-like website that lists all permits being considered and permits recently issued would be very helpful. I could subscribe via RSS and get notified of special use applications.

What’s a special use permit?

A special use permit is needed when the developer doesn’t have the right to build something that requires a special use permit. Like establishments for day laborers. Or drive throughs. Or businesses that sell liquor. Or a pawn shop. Speaking of pawn shops, Nodarse Family, LLC, owns the property 2826 N Milwaukee, for which the owner is seeking a special use permit to open one. This is in the 35th Ward, the same ward whose Alderman seems to have it out to build as much parking as can be built. You can see these applications on the ZBA’s agendas.

I’m not a fan of drive throughs.

B3-2: “Community shopping – destination oriented, no limit on size of commercial establishment. Allows dwelling units above ground floor.”

Google Maps is annoying sometimes

I was looking up traffic counts on the Chicago Traffic Tracker website and saw that the Halsted Street bridge over the Chicago River just north of Chicago Avenue is missing. It’s shown as a gray line with the text “Halsted Street (planned)”.

This is not the most accurate message. The west side sidewalk is still open to foot and bicycle transportation, as I pointed out in my Grid Chicago article, The Halsted Passage. I wonder how it got in there.

I’ll report this as a problem, but I’m wary of it actually being updated to show that people on foot can still cross the river here. I’ve used Google Maps’s Map Maker tool once, and I didn’t like the experience. My correctly-made adjustment of a street was questioned and I was asked to revert my change. I refused and eventually my change was approved… because it was correct. I guess that someone used Map Maker to (incorrectly) modify the street at this part. This street segment in Map Maker should be designated something close to a “pedestrian walkway” instead of a bridge for automobile, bus, and bicycle traffic.

The Google Maps walking directions for walking from Division Street to Chicago Avenue don’t show the option of using the sidewalk, which is entirely possible (I did it again this week).

Why food and drinks cost more downtown

The Metropolitan Pier and Exposition Authority is a quasi-governmental body created by the Illinois legislature, similarly to how it created the Chicago Transit Authority. The authority is also known as McPier. McPier is able to add 1% sales tax to the sale of food and drinks in three areas in Chicago, apparently to support the operations of Navy Pier (a place I avoid) and McCormick Place. I’m writing this post because of an article I read on Crain’s Chicago Business about Chicago having the highest restaurant tax rate that failed to describe the area in question.

The main area is downtown, although the boundaries extend far beyond downtown. I first came encountered the tax as a manager of the Jamba Juice at 1322 S Halsted Street (at Maxwell Street) in the University Village development on UIC’s south campus. The other two areas encompass Midway (MDW) and O’Hare airports (ORD). I haven’t mapped them to see exactly how much land beyond the airports the areas encompass.

The downtown area is described in 70 ILCS 210, section 13, as follows:

(b) (3) that portion of the City of Chicago located within the following area: Beginning at the point 150 feet west of the intersection of the west line of North Ashland Avenue and the north line of West Diversey Avenue, then north 150 feet, then east along a line 150 feet north of the north line of West Diversey Avenue extended to the shoreline of Lake Michigan, then following the shoreline of Lake Michigan (including Navy Pier and all other improvements fixed to land, docks, or piers) to the point where the shoreline of Lake Michigan and the Adlai E. Stevenson Expressway extended east to that shoreline intersect, then west along the Adlai E. Stevenson Expressway to a point 150 feet west of the west line of South Ashland Avenue, then north along a line 150 feet west of the west line of South and North Ashland Avenue to the point of beginning.

View Metropolitan Pier and Exposition Authority boundaries in a larger map. I created this map by following the directions in the block quoted text above. Do not use this map to determine if your business is required to collect and remit the McPier tax. It’s not an accurate map: I didn’t measure 150 feet from any street line – I guessed.

Also interesting: all drinks (alcoholic and sodas) and food sold on boats that arrive at or depart Lake Michigan shores within the area described above are subject to the tax. And more interesting is that sales at stores whose principal income is from drinks (alcoholic and sodas) and food for off-site but immediate consumption are also subject to the tax. You can supply the Illinois Department of Revenue with your sales tax information.

I like what Bonnie McGrath said in the Chicago Journal last year:

Is this fair? Why should we South Loopers–not to mention the other neighborhoods near downtown–have to pay extra for restaurant food? What exactly are we getting that other Chicago residents don’t get that we have to pay an extra tax?

I’d also like to know why McPier needs additional revenue to supplement the millions (maybe billions?) it revenue it receives from vendor fees, events, rents, and other sources in the operation of Navy Pier and McCormick Place.

McPier also gets a cut of hotel room bookings.