Page 117 of 170

The blizzard’s calming effect

Last Wednesday night, after the blizzard had stopped and the city had plowed arterial roads, I took two buses to Pilsen in 36 minutes. Transit buses have an average speed lower than bicycling and I don’t think I could have biked there in 36 minutes. (I didn’t want to bike because I didn’t know the condition of roads from my new place in Avondale to dinner in Pilsen.)

I credit the speedy journey to the complete lack of cars on the road and the few people wanting to go out on Wednesday, as well as ride the bus.

The blizzard gave Chicagoans a break. Hundreds of thousands of workers stayed home on Wednesday. Thousands more got the day off on Thursday. Car traffic remained light through Friday and the Chicago Transit Authority trains and buses were packed on Thursday (partially because of mechanical problems on the Blue Line but also because of new riders who couldn’t drive or carpool).

Chicagoans enjoy strolling through Humboldt Park. Photo by Joshua Koonce.

Many people took walking tours around their parks and neighborhoods, or went to see the calamity of Lake Shore Drive. Flickr is loaded with the explorers’ photos. Check out 2,000+ labeled “snomg chicago.”

The blizzard’s effect on traffic and roads

The snow plows inadvertently created a curb extension at the main intersection in Wicker Park, often used as part of a traffic calming project. This was gone on Saturday, but in addition to its removal, the entire corner sidewalk was cleared.

A lot of bike lanes are buried right now and people riding bikes are riding in the middle shared lanes, further calming traffic. I’m not sure how long the civility I noticed between drivers and bicyclists last week will last, even as bike lanes remain “closed” or have been illegally co-opted into backup parking lanes. See next photo.

These drivers have illegally parked their cars in the bike lane. The municipal code does not offer any relevant (i.e. snow-related) exemptions for parking or standing in bike lanes.

Riding and driving through town has been interesting. There’s no room for people riding bikes to share the lane with drivers side by side, so they must share it front to back.

A better way for bike storage on trains

UPDATED: How BART (Bay Area Rapid Transit, San Francisco region) treats bikes on board. Simple signage and a bike graphic tell all passengers where bikes belong. Photo by Jim Dyer. More photos.

Look at the photo below and take in all the details about the bicycle’s position and orientation in relation to the vestibule, modesty panel, doors, seating, and aisle. Accommodating bicycles on many of the Chicago Transit Authority’s ‘L’ cars can be a hassle, not only for the bicycle-toting customer, but for the other passengers as well.

This photo shows what I see as the only appropriate location for a bicycle on the Red Line’s 2600-series car.

The passengers may be hit by wheels or handlebars, or have their personal space intruded upon or reduced.

The bicycle owner has the responsibility to ensure they don’t hit or disturb other passengers – to be successful with this on every trip is nearly impossible. Additionally, according to the platform position, the owner will have to move their bicycle to the other side of vestibule to allow access to the doors and aisle. Sometimes other passengers are already standing there, not paying attention, and it can be almost embarrassing to ask them to excuse you and your bicycle.

The 2600-series car in which I rode and took these photographs was built in the 1980s. I think it’s safe to say that the designers and engineers at CTA and Budd Manufacturing didn’t consider the spatial needs of bicycles in the plans. And retrofitting train cars is expensive. Bicycle riders in Chicago “get by” with the current rolling stock. (The train cars with the butterfly doors cannot accommodate wheelchairs or bicycles – there are 2 of these cars on many Blue Line runs.)

But there’s an opportunity to change things because the CTA will be asking Bombardier Transportation for some refinements on the 5000-series cars that the transit agency has been testing on all lines. Now’s our chance to request changes!

If you don’t know of the differences beforehand, you can’t recognize that this is a brand new car with a slightly different exterior design. The interior, however, differs wildly.

The most striking distance is the longitudinal or aisle-facing seats.

The new train car now provides two spaces for passengers in wheelchairs (look in the middle for the wide seat backs facing you). The seats flip up and there’s a seatbelt to hold the wheelchair in place. Photo by Kevin Zolkiewicz.

Based on the design we’ve all seen, I suggest the CTA and Bombardier make the following changes to better hold bicycles on board:

  1. With signage and markings (on the interior walls and floor), indicate that the space for wheelchairs is a shared space and that passengers with bicycles may also use it. The signage would mention that customers with disabilities always have priority as well as mention the times bicycles are allowed on-board. This change would send a stronger message to all other passengers that bicycle owners also have a priority to use this space and they may be asked to move so a bicycle can fit here.
  2. In an educational and marketing campaign, teach customers about bike-on-board rules, where to place bicycles on the ‘L’, and where and when customers can expect passengers with bicycles.
  3. On or near the train door exterior, use markings to indicate where passengers with bicycles should board. The current system has a sign on one entrance saying, “Limit 2 bicycles this car” (see photo below). The other entrance has no sign. The confusion lies here: Should two bicycles occupy the same space, at one end of the car and only enter through the door with the sign? Or should two bicycles occupy opposite ends of the car and enter through either door? If the former is preferred, the second door could have a sign that says one should enter with their bicycle through the other door.
  4. Install a method or mechanism that can hold a bicycle still. This could be with a hook, a seatbelt, or a “groove” in the floor. In Minneapolis, passengers with bicycles can hang them (see photo below).
  5. Install a light at each door in the car that would pulse to indicate which doors will open at the next platform (left or right). This can help passengers with bicycles know where other customers will be alighting and boarding.

I have some other ideas for the 5000-series cars but not related to bicycling.

Photo of exterior bicycle sign. Photo by Payton Chung.

Photo of bicycle hanging from hook within the Minneapolis-St. Paul Metro Transit Hiawatha light rail train.

Ideas for CTA’s incoming 5000-series train cars

Update: Stay current on this topic at Grid Chicago. Latest post was on July 25, 2011, about the latest rail car order
The Chicago Transit Authority (CTA) is not exactly seeking feedback from the public at this time about the Bombardier-built 5000-series train cars it’s testing now. But this is our one chance to make these trains eve better.
  • No beige. This is not the 1980s.
  • The seats shouldn’t define individual spaces if they’re going to be longitudinal. Seat cups mean “If you fit into one, then you fit into one. If you take up 110% the width of one, you now take up two.” But if they were benches like in New York, people would only fill exactly as much space as they take up.
  • The end caps should be a different color plastic, not something intended to look like the aluminum siding from afar, which then up close is clearly nothing more than a plastic approximation. Even without redesigning the endcaps, the dye color being darker and some reflective striping (to make them not vanish into the night if the car has no lighting), would make them look ultra modern.
  • Remove the modesty panels. They serve little purpose in this day and age.

If you have ideas, leave them in the comments or email the Chicago Transit Authority.

Written in conjunction with Better bicycle storage on trains.

Photo by Jeff Zoline.

Intercity bike paths, or “bike roads”

Imagine every suburb around Chicagoland connected to a handful of others by a “bike road.” In the Netherlands, it’s a strip of pavement about 1.5 American-car lanes wide but the bicyclist always has priority and any drivers must drive at the speed of the bicyclist. For cars, the road serves mostly rural towns, but for bicycling, it serves as part of a cross-country and intercity bikeway. On some parts of your trip to another town you might ride on bike roads, and others on bike-only paths.

Bike road along the tracks

This bike road helps connect Houten and Utrecht. I’m traveling north alongside a Nederlandse Spoorwegen Sprinter train. See more photos from my day trip to Utrecht and Houten.

The Cal-Sag Trail is a typical multi-use path in the works and will do something similar, connecting south suburban Cook County communities (like Calumet Park, Blue Island, and Alsip) along the Calumet River and the Calumet-Sag Channel. It will be car-free. While multi-use paths in Illinois are often used for recreational or touring use (many don’t lead to destinations, or are out of the way for convenient routes), the Cal-Sag Trail will be useful for social, shopping, and school trips as well as fitness. Additionally, it will connect to at least three existing trails.

When any path or road opens it needs sufficient wayfinding. The “United States Numbered Bicycle Routes” system began in 1982 to do for bicycling what numbered highways did for driving: make it easy to create and follow a route. Planning for the system was revitalized in 2010.

Several European countries (including Netherlands and Germany) have had such a system for years but instead of numbering routes, they number junctions. Starting at any origin shown on the junction map, find the junctions that connect the route segments to your destination and remember their numbers. Then watch for signs that point you in the direction of the next number. You only need to remember 2-3 numbered junctions at a time because there will eventually be a new map to remind you which junction is next. See photo and route example below.

Wayfinding

This junction is number 34. To go to Houten from here, follow the directional signs, first to 33, then to 36, then to 01. The “bike road” photo above was taken near junction 36.

Glorious Illinois Prairie Path entrance

Welcome to the grand entrance of the Illinois Prairie Path to Elmhurst, Glen Ellyn, Wheaton, Aurora, and Batavia! Google Street View image

Another Chicago trail example

There’s a great example near Chicago of a trail that’s “80% there.” The Illinois Prairie Path begins in Maywood, Illinois, a couple miles from the western edge of Chicago, and a mile from the Forest Park Blue Line terminal. Getting there from Chicago is a problem: it’s not connected to anything but 4-lane, fast-moving 1st Avenue. And bicycling to Maywood from anywhere in Chicago there is a lack of safe routes, regarding infrastructure and personal safety (a lot of Chicagoans would consider the center west side quite dangerous). I grew up the far western suburb of Batavia and have occasionally ridden the trail, but only once did I ride it while living in Chicago.

I wanted to visit Fry’s Electronics in Downers Grove, just 4 miles from the trail. It took me over an hour to get to the entrance and then I missed the sign (or wasn’t there one?) for Finley Road and went too far. It was getting dark, so I decided to call the trip a small loss and boarded a Metra train at Glen Ellyn for downtown.