One of the first things I did after I bought a two-flat in July was contact Peoples Gas and Comed to ensure utilities were in my name, and that the utility connections would not be interrupted.

A few days later I decided that I wasn’t going to move in, because I wanted to make a good amount of changes and the best time to do that would be when nobody is living there. “Good amount of changes” turned into “gut rehab”. One of my friends is an architect and we (mostly him) are drawing permit plans right now.

It wasn’t until a week ago (8 weeks since I bought the house) that I realized there’s no reason to be paying for Peoples Gas to maintain a connection when I’m not using natural gas.

I’m writing this journal entry to exclaim how expensive it is to just “leave the gas line connected”.

It costs $50 per month per unit to have the privilege of possibly purchasing the delivery of natural gas through a pipe. Both units used 0 therms in the longest-period bill I received. (I received three bills, only one of which was for 30 days.)

The bill for the only 30-day period Peoples Gas served one of the units in my two-flat. Both units are unoccupied until after the gut rehab is completed. See the “customer charge”, which is the charge just to have an account open and for the potential to use gas.

I’ve got to pay $50 per unit for no gas.

I visited a three-flat under construction in Pilsen on Friday, and talked to the developer, Brent. He described how he’s following high-efficiency building wall standards to create a “tight envelope” (one in which very little air can leak) so that the tenants can “receive the comfort they’re paying for”. When it comes to setting the thermostat, the air delivered by HVAC machines should match that exactly, no more, no less. No oversized furnaces pushing too much heated air because so much of the air leaks through the walls and windows.

And, as a way to control costs, Brent will not connect a natural gas pipe to the building, mostly because of the expensive and default customer charge that persists even when no gas is used. A VRF (variable refrigerant flow) and heat pump machines will be entirely powered by electricity to serve the tenant’s heating and cooling needs.

Brent said that the tight building envelope coupled with the high-efficiency HVAC means that it’s more cost effective to use electricity to heat a house than natural gas.

After our meeting, I looked again at my final bill from Peoples Gas (I closed the account two days prior) and understood what Brent was saying about controlling costs. With an electric water heater and an electric range, there’s no need to have any gas connection.

I will probably have to keep the gas at my two-flat, to power the furnaces, because I don’t have the expertise or financial resources to renovate an existing building to have a tight enough envelope to make electrically-generated heat more cost effective than gas-generated heat.

Update January 13, 2021: I turned off the gas and closed the accounts so I don’t have to waste any money while I’m not living there (a gut rehab still needs to happen).

To keep water pipes from freezing and bursting I cleared the vast majority of water lines and added an electric pipe heating cable to keep the remaining sections warm.

The two water service pipes (I don’t know why there are two) have an electric pipe heating cable and are wrapped in foam insulation. The cable has a thermostat that touches the pipe and starts heating when the pipe drops to 38°F. The pipe is heated until the thermostat detects ~46°F.